Repeat steps 1-5 for any remaining components. If the component does not respond to any of the brand codes listed, refer to either the "Autosearch Instructions" on page 7 or the "Teaching Your SMART15" section on page 7.
#GEMINI EASY 3 REMOTE CONTROL MANUAL CODE#
*In order to determine which brand code will provide the maximum number of compatible functions, try all of the codes available for your brand component. If there is no response, select the next available brand code and repeat steps 3 through 5. If the device turns on, the correct code was entered *.
To test the brand code entered, point the remote towards the device and press the power button on your SMART15 for this component. If a valid code was entered and accepted, all four indicator lights will momentarily flash and then turn off. Using the numeric keypad, enter the 3-digit brand code that corresponds to your component, followed by the "ENTER" key. Press and hold the "ENTER" and "0" keys simultaneously, until the indicator light for the device mode selected turns on (about 4 seconds). To program a second TV, VCR or Cable Box, select the AUX mode. Select the type of device (TV, VCR, CATV or AUX) to program by pressing the correct "POWER" key. When more than one code is listed, enter the codes, starting with the first code available, according to the instructions that follow in steps 2-4, until the component responds. Locate the 3-digit brand code which corresponds to the name brand of your component. To program your new SMART15 using the brand codes listed, refer to the following instructions: It cannot operate a device which is not remote control compatible. NOTE: The SMART15 can only operate components which already use a remote control. See "Battery Requirements" before programming. Your SMART15 requires 2 "AAA" alkaline batteries (not included). Your SMART15 features a non-volatile memory which retains all programmed codes, as well as "learned" functions, even if the batteries are removed. As an added feature, you may also supplement any brand code, pre-programmed function keys by teaching the SMART15 additional functions from your original remotes. This feature enables the SMART15 to be used with any device whose brand code is not listed in the pages that follow (i.e.Īudio components, IR controlled home automation devices, etc.). Your SMART15 is also a "learning" remote, capable of memorizing and duplicating any function from your existing infra-red (IR) remote controls. By selecting the correct code for your video equipment, this single remote will operate all of the major functions available on your existing remote. The SMART15 is designed with 155 pre-programmed (brand) codes which will operate almost all available Your new SMART15 eliminates the necessity of using many different remote controls to operate your video components. Notes on Operation | Battery Requirements Instructions | Teaching Your SMART15 | To Teach Your SMART15 | Gemini Industries, Inc.: SMART15 English InstructionsĪbout Your SMART15 | Programming the Brand Codes | AutoSearch